Enter Product Keyword


This is a Complete PAK Assembly, Recommended for Applications Requiring Safety From Wind-Borne Debris. Includes Tested and Approved, Glazing Components.  Warnock-Hersey Tested & Listed.

Florida Building Code Approval File #FL13187

Material: 18 gauge galvanneal sheet frame. Max size 30" x 60-1/2"

Construction: 1-1/2" trim with mitered and welded corners, square return and countersunk mounting holes on both sides.

Sealing: Between Frame & Glass: Sponge rubber, EPDM, neo-prene press-on glazing tape 1/8" x 3/8". Dow Corning #995 (or equal) silicone structural glazing sealant applied per Dow Corning instructions. Between Door & Frame Perimeter: Closed cell EPDM press-on glazing tape 1/4" x 3/8" applied to inside face of lite kit frame. Screw Entry Points: Neoprene “O”-Ring, 7/32” and 5/32” I.D. with 1/16” wall, are provided to be used at each screw head. Setting Blocks to Suit: EPDM or neoprene setting blocks 1/16" minimum thickness at quarter points of bot-tom of glass and elsewhere as needed.

Finish: (B) Mineral Bronze or (G) Gray Primer

Door: For 1-3/4" to 3" door.

Fasteners: #8 x 32 Phillips head thru bolts with blank head one side, to match finish.

Glass: Glass 5/16" thick configuration; (2) 1/8" heat-strengthened glass lites separated by 0.075" interlayer.


Severe Windstorm Approved Vision Frame Tested in Accordance With:

Glazing Impact:  ASTM E1996 (impact 350 ft lb, Missile Level D, DP Rating 70 psf)

Cyclic Wind Pressure Loading:  ASTM E1886

Uniform Static Air Pressure:  ASTM E330

Windstorm Resistance, Door Components: ANSI A250.13

Certified by Warnock-Hersey