Activ-Mat™ 700 Series - Roll-Up Entrance Mat
The 700 Series mat combines the benefit of tread with aluminum scraping bars built in to each rail to keep your building cleaner. Available as surface-mounted or recessed into a 7/16” deep opening.
- LDPE hinges that cushion each tread rail are quieter than aluminum hinges.
- Mat rolls up compactly for cleaning.
- Drainage holes between tread rails allows moisture and dirt to fall below mat.
- Add to existing entryway with the surface-mounted frame.
Material: 6063-T5 and 6063-T6 extruded aluminum alloy tread rails and frames.
Depth: 3/8” (9.5 mm).
Standard Finish: Mill.
Tread Spacing: 2” (50.8 mm) on center with 6 treads per foot in the direction of travel.
Spacing Between Rails: Heelproof spacing of 3/16”.
Rolling Wheel Load Rating: 350 lbs
Tread Insert Options
EM700 Premium Carpet Tread: Super absorbent, stain-resistant 33 oz. nylon carpet for interiors, now with 10 mil scraping fibers added.
EM701 Vinyl Tread: Full length vinyl serrations provide excellent traction for wet exterior or interior entry ways.
EM702 Serrated Aluminum Tread: All aluminum construction with full-length serrations, nonflammable and waterproof for interior or exterior entry ways.
EM704 Vinyl Abrasive Tread: Abrasive grit provides our highest coefficient of friction for interior installations.
EM705 Tuff Tread™: Non-absorbent polypropylene carpet with tough 20 mil fibers is best at scraping shoes to remove dirt. Interior or exterior.
EM710 Alternating:Two types of tread in an alternating pattern provide scraping combined with absorbent carpet for maximum building protection.
EFRA7: Angle frame for butting up to tile or carpet. 7/16” (11.1 mm) deep by 1/8” (3.2mm) profile. Extruded aluminum 6063-T5 alloy construction. End filler is provided at both ends to create a snug fit.
EFRT7: Frame for transition to door threshold. 1/2” (12.7 mm) deep with 1-1/8” (28.6 mm) face and 1-1/2” extension under tread. Extruded aluminum 6063-T5 alloy construction.
EFSA7: Surface-mounted tapered aluminum frame for installation by anchoring to floor. Serrated aluminum 6063-T5 alloy extrusion frame 3/8” (9.5 mm) deep by 1-7/8” (47.6 mm) gives traction to the full width of the mat. End filler is provided at both ends for a snug fit.
EFSV7: Surface-mounted tapered frame for a moveable installation. 2” (50.8 mm) wide durable black vinyl with serrations to reduce slipping is attached mechanically to tread rails. Order in full tread-width increments.
EFST7: Surface-mounted tapered vinyl frame with integral rubber tray under entire mat. Clean up of debris that falls under the mat is easy, and protects flooring. Order in full tread-width increments.
|Frame Part Number||Frame Description||Submittal|
|EFRA7||Recessed Aluminum Frame|
|EFRT7||Recessed Threshhold Frame|
|EFSA7||Surface Mounted Aluminum Frame|
|EFSV7||Surface Mounted Vinyl Frame|
|EFST7||Surface Mounted Base Tray|