Activ-Mat™ 800 Series - Roll-Up Entrance Mat
The durable 800 series with aluminum hinges stands up to dirt with both the tread of your selection and aluminum scraping bars built in to each rail. The 800 series can be surface-mounted or recessed into a 7/16” deep opening.
- Aluminum hinges are more durable than vinyl hinges.
- Mat rolls up compactly for cleaning.
- Dirt and moisture fall through drainage holes between tread rails.
- Add to existing entryway with the surface-mounted frame.
Material: 6063-T5 and 6063-T6 extruded aluminum alloy tread rails and frames.
Depth: 3/8” (9.5 mm).
Standard Finish: Mill
Tread Spacing: 2” (50.8 mm) on center with 6 treads per foot in the direction of travel.
Spacing Between Rails: Heelproof spacing of 3/16”.
Rolling Wheel Load Rating: 350 lbs
Tread Insert Options
EM800 Premium Carpet Tread: Super absorbent, stain-resistant 33 oz. nylon carpet for interiors, now with 10 mil scraping fibers added.
EM801 Vinyl Tread: Full length serrations provide excellent traction for wet interior entry ways.
EM802 Serrated Aluminum Tread: All aluminum construction with full-length serrations, nonflammable and waterproof for interior or exterior entry ways.
EM804 Vinyl Abrasive Tread: Abrasive grit provides our highest coefficient of friction for interior installations.
EM805 Tuff Tread™: Non-absorbent polypropylene carpet with tough 20 mil fibers is best at scraping shoes to remove dirt. Interior or exterior.
EM810 Alternating: Two types of tread in an alternating pattern provide scraping combined with absorbent carpet for maximum building protection.
EFRA8: Angle frame for butting up to tile or carpet. 7/16” (11.1 mm) deep by 1/8” (3.2mm) profile. Extruded aluminum 6063-T5 alloy construction. End filler is provided at both ends to create a snug fit.
EFRT8: Frame for transition to door threshold. 1/2” (12.7 mm) deep with 1-1/8” (28.6 mm) face and 1-1/2” extension under tread. Extruded aluminum 6063-T5 alloy construction.
EFSA8: Surface-mounted tapered aluminum frame for installation by anchoring to floor. Serrated aluminum 6063-T5 alloy extrusion frame 3/8” (9.5 mm) deep by 1-7/8” (47.6 mm) gives traction to the full width of the mat. End filler is provided at both ends for a snug fit.
EFSV8: Surface-mounted tapered frame for a moveable installation. 2” (50.8 mm) wide durable black vinyl with serrations to reduce slipping is attached mechanically to tread rails. Order in full tread-width increments.
EFST8: Surface-mounted tapered vinyl frame with integral rubber tray under entire mat. Clean up of debris that falls under the mat is easy, and protects flooring. Order in full tread-width increments.
|Frame Part Number||Frame Description||Submittal|
|EFRA8||Recessed Aluminum Frame|
|EFRT8||Recessed Threshhold Frame|
|EFSA8||Surface Mounted Aluminum Frame|
|EFSV8||Surface Mounted Vinyl Frame|
|EFST8||Surface Mounted Base Tray|