Activar Construction Products Group

A Recessed Frame & Door Access Panel that is Installed Before the Finishing Wallboard with a Trimless Appearance

Materials: Painted galvanized steel or 304 stainless steel.

Frame: 16 ga (1.61mm) steel.  Depth  1-1/4” (32mm).

Mounting Flange:  Concealed flange is recessed 5/8” from face of frame to allow for wallboard installation on top.  Flange is 1-1/4” (32 mm) W.

Door Panel: - 18 ga (1.31mm).  Liner - 22 ga (0.85mm).  Face of door is recessed 5/8” inch to accept tile or wallboard insert.

Insulation: The door panel contains 1-1/2” (38mm) of high temperature insulation material.

Finishes: The paint finish is an electrostatically applied rust inhibitive prime coat or a No. 4 polished stainless steel finish  on exterior surface.

Hinges: The continuous piano hinge allows the door panel to open 175° for easy access. The hinge is placed on the long side of the door (“H” dimension) unless otherwise requested. 

Panel Closer: The automatic panel closer will close and latch the door from an open position of approximately 90° as required by code.

Latch: The standard factory installed latch is a flush mount 1/4” allen key. All fire-rated locks are self-latching and include an interior latch release mechanism allowing the doors to be opened from the inside.  

Sizes: Minimum 12" x 12"

This model of wall and ceiling fire-rated panels is manufactured under the factory inspection service of Intertek Warnock Hersey) and have a label reading: “Listed access frame and insulated fire door assembly 2 hour fire rating. Vertical and Horizontal Installation.”