FD2L SERIES - 2 HOUR FIRE-RATED LAUNDRY OR GARBAGE CHUTE ACCESS DOOR

A Specialty  Two Hour Fire-rated  Door for Laundry or Garbage Chute Access.  The Wider 1-3/4” Flange Covers Opening Edges and the Handle Provides Easy Access to the Chute. Optional Smoke Gasket is Available for Garbage Chute Installations

Materials: Painted, galvanized steel or 304 stainless steel.

Frame: 16 ga (1.61mm) steel.  Depth “D”= 2-3/4” (70mm)

Wall Trim: Width - 1-3/4” (45mm) with a  3/8” (9.52mm) return.

Door Panel: 18 ga (1.31mm) with 22 ga (0.85mm) liner

Insulation: The door panel contains 1-1/2” (38mm) of high temperature insulation material.

Finishes: The paint finish is an electrostatically applied rust inhibitive prime coat or a No. 4 polished stainless steel finish  on exterior surface.

Hinges: The continuous stainless steel piano hinge is designed to secure the door panel and open to 180º. The hinge is placed on the long side of the door (“H” dimension) unless otherwise requested. 

Panel Closer: Listed concealed door closure.

Latch: The standard factory installed latch is a non-locking “T” handle. 

Sizes: Minimum 16" x 16"

Listing: This model of wall fire-rated panels is manufactured under the factory inspection service of Intertek Warnock Hersey) and have a label reading: “Listed access frame and insulated fire door assembly 2 hour fire rating. Vertical Installation only. Temperature rise maximum 139° C / 250° F at 30 minutes, 250° C / 450° F at 60 minutes.”