RHR - RETROFIT GALVANIZED ROOF HATCHES
Galvanized roof hatch with 12" high curb and 3 5/8" wide flange for securing to roof deck for both new and existing roof openings.
Load/Deflection: Roof hatch cover has been tested and approved to support a minimum live load of 40 lbs/ft² with a maximum deflection of 1/150th of the span.
Insulation: The curb includes 1” x 11” pine board surrounding the base. The cover has 1” mineral wool insulation in the space between the exterior cover and liner.
Certifications: The RHR includes components or materials that are ASTM certified under Specifications A792/A792M-06a; A653/A653M-06a; C726-05; and A36/A36M-05.
Construction: Hatch is 16 gauge galvanized steel with 12” high curb and 3-5/8” wide flange for securing to roof deck. The cover includes a 16 gauge galvanized steel exterior and 22 gauge liner with an EPDM gasket door seal.
Opening Size: 30" x 36"
Hardware: Hardware includes a heavy-duty hinge, heavy-gauge automatic hold open arm with red grip, compression spring-operated cylinders, rubber-coated exterior handle with integral padlock hasp and interior latching handle with padlock hasp.
Finish: Bonderite™ red powder coat.
Options: Custom Sizes and Finishes Available - Contact customer service at 800-554-6077 or firstname.lastname@example.org
Remember the Roof Hatch Safety Rail! Our Patented railing system with a clamping frame around curb base of roof or fire hatch with top rails, mid rails and chain or swinging gate. Meets OSHA required compliance for safe egress and ingress through rooftop hatch openings while hatch is in use. Complies with OSHA CFR 29 -1910.23 and CFR 29 - 1910.27.