VELO PRIVACY SCREEN FOR VISION LITES - PS

New Patent-Pending Product! Add Privacy to Existing Vision Lites.  Provides Complete Blocking of Vision & Light and Attaches Without tools. An Attractive, Cost-Effective Way to Add a Privacy Shade to Existing Vision Lites in Schools, Offices — Wherever Privacy is Needed!

♦ Fits All Manufacturers Vision Lites 
♦ Provides Complete Blocking of Light and Vision
♦ Attaches in Seconds with 3M Dual LockR Fasteners
♦ Blends in With Existing Frame.
♦ UL Listed for Use in Fire-Rated Doors Up to 90 Minutes

♦ Now in Sizes to Fit up to 30” x 36” Half Lites!
♦ New Version for Sidelites

Material: 18 gauge aluminum frame.  

Construction: 1-1/4” x 1/4” frame on 4 sides with radius corners, mitered and welded.  7/8” deep slots on both sides do not allow any light—even on the edges.

Roller: A spring-operated roller in an aluminum housing with black endcaps allows for controlled opening and closing of the unit.  Push-button closer quickly and easily rewinds shade. Roller Unit extends 1” from frame face.

Shade: A durable 100% opaque, light blocking fabric material is attached to a rigid pull-down bar mounted into the side channels.  The shade slides up and down with ease and locks into position when pulled down to any position.

Powder Coat Finishes: (B) Mineral Bronze (standard color), (BK) Black, (FBK) Flat Black, (W) White, (SB) SC Beige, (SI) Silver, (S) Sand, (AB) AMS Beige, (R) Red, (GH) Gray Hammertone.  Field painting is not recommended for this product.

Sizes: Minimum 169 sq. inches for UL listing from 6 3/8" wide, smaller sizes to 5" W x 7" H available without listing, Maximum width 31 3/8" x  37 3/8”. Order in any size in  1/8” increments.  

Installation: Attach to installed vision lite using 5/8” 3M Dual Lock® fasteners provided.  Thickness of the vision lite or construction material does not matter as long as there is a flat 5/8” frame on which to mount the privacy screen.

UL Listing 90 Minutes: Tested to maintain existing door, vision kit and glazing ratings up to 90 minutes for: Steel and wood doors, both temp-rise and non temp-rise. Privacy Screen must be attached to a metal vision frame kit, not to the door itself, wood vision frame kits or to wood stops. UL-listed models for side lites, transoms and borrowed lite assemblies and installation on non-metal frame kits are not available at this time, but are in development.  See File # R38628

ORDERING:THE MOST IMPORTANT THING TO CONSIDER WHEN ORDERING IS VISION FRAME SIZE.

MEASURE THE OUTSIDE DIMENSIONS OF THE EXISTING VISION FRAME. THE OUTSIDE DIMENSIONS OF THE PRIVACY SCREEN SHOULD BE EQUAL TO THE SIZE OF YOUR VISION FRAME  IN ORDER TO HAVE A PROFESSIONAL-LOOKING INSTALLATION.  EXAMPLE: Privacy Screen Model for VSL 1212 is PS-13G13GB.  Order size corresponds to outside measurements of vision lite.

View September 2014 Article @ Buildings.com on "How to Warn Occupants about Active Shooters".

NOW AVAILABLE FOR SIDELITES UP TO 88" HIGH